In this application, you have to configure the port mapping or virtual server of the routers in LAN A and LAN B; and forward the ports to the corresponding LAN IP by the NAT router so that the NVR can save the recording data from the remote IP camera and the remote PC can access the monitoring page over the Internet. The VioStor VS-8124U-RP Pro+ can simultaneously handle inputs from up to 24 Mp. Configure the SMTP server and SMSC server settings on the NVR in order to. The VioStor NVR supports dynamic DNS (DDNS) for convenient access to the. Prices, specifications, and images are subject to change without notice.
ModeDescriptionFault Tolerance (Failover)Active-BackupAll traffic is sent and received using the interface that was first added to the trunking group. If this primary interface becomes unavailable, the secondary interface will become active.BroadcastTransmits the same network packets to all the network interface cards.Load balancing & FailoverBalance-tlbIncoming traffic is received by the current interface.
If the interface fails, a slave interface takes over the MAC address of the failed interface. MessageDescriptionConnectedThe NAS is currently connected to the Wi-Fi network.ConnectingThe NAS is trying to connect to the Wi-Fi network.Out of range or hidden SSIDThe wireless signal is not available or the SSID is not being broadcast.Failed to get IPThe NAS is connected to the Wi-Fi network but could not get an IP address from the DHCP server. Check the router settings.Association failedThe NAS cannot connect to the Wi-Fi network. Check the router settings.Incorrect keyThe entered password is incorrect.Auto connectAutomatically connect to the Wi-Fi network. This is not supported if the SSID of the Wi-Fi network is hidden.Thunderbolt. SettingDescriptionStart IP AddressSpecify the starting IP address in a range allocated to DHCP clients.End IP AddressSpecify the ending IP addresses in a range allocated to DHCP clients.Subnet MaskSpecify the subnet mask used to subdivide your IP address.Lease TimeSpecify the length of time that an IP address is reserved for a DHCP client. The IP address is made available to other clients when the lease expires.Default GatewaySpecify the IP address of the default gateway for the DHCP server.Primary DNS ServerSpecify a DNS server for the DHCP server.Secondary DNS ServerSpecify a secondary DNS server for the DHCP server.
SettingDescriptionStart IP AddressSpecify the starting IP address in a range allocated to DHCP clients.End IP AddressSpecify the ending IP addresses in a range allocated to DHCP clients.Subnet MaskSpecify the subnet mask used to subdivide your IP address.Lease TimeSpecify the length of time that an IP address is reserved for a DHCP client. The IP address is made available to other clients when the lease expires.Default GatewaySpecify the IP address of the default gateway for the DHCP server.Primary DNS ServerSpecify a DNS server for the DHCP server.Secondary DNS ServerSpecify a secondary DNS server for the DHCP server.